Skip to main content

News

Practical Aspects of PROFIBUS, PROFINET and IO-Link seminar

Bob Squirrell,
  • 17.04.2018

Free Seminar – AFRC, Catapult Centre, Inchinnan, April 17th, 2018

This free-to-attend seminar addresses the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention to Industry 4.0 and the Industrial Internet of Things (IIoT).

Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, it focuses on the practical aspects of using PROFIBUS, PROFINET and IO-Link, from system design and safety considerations through to fault-finding and maintenance.

Who should attend?

Supported by an exhibition with demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers, and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant.

With nearly 80 million nodes installed worldwide, PROFIBUS, PROFINET and IO-Link are truly market leaders, providing state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.

This seminar is ably presented by specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

Draft Agenda

 

 

Time

 
 

Item

 
 

Presenter

 
 

09:15 – 09:30

 
 

Welcome and introduction to exhibitors

 
 

Chris McComb, iTech

 
 

09:30 – 10:00

 
 

Keynote address: OEM Lifecycle – The Past, Present and Future

 
Chris McComb, iTech

10:00 – 10:30

 
 

PROFIBUS International and basics of PROFIBUS and PROFINET

 
 

Mark Freeman, Siemens

 
 

10:30 – 11:00

 
 

PROFIBUS DP/PA network design

 
 

Chris McComb, iTech

 
 

11:00 – 11:30

 
 

Coffee and exhibition

 
 

 

 
 

11:30 – 12:00

 
 

PROFINET network design

 
 

Andy Gilbert, Siemens

 
 

12:00 – 12:30

 
 

The effects of EMC on bus networks

 
 

Peter Thomas, Control Specialists

 
 

12:30 – 13:00

 
 

Industrial network commissioning and testing

 
 

Dave Tomlin, Hitex

 
 

13:00 – 14:00

 
 

Lunch and Exhibition or Facility tour

 
 

 

 
 

14:00 – 14:30

 
 

PROFIBUS and PROFINET device configuration tools.

 
 

Phil Waterworth, Endress + Hauser

 
 

14:30 – 15:00

 
 

IO-Link technology

 
 

Russell Smith, Balluff

 
 

15:00 – 15:30

 
 

Industrial networks safety & security

 
 

Tom Hammond, Siemens

 
 

15:30 – 16:00

 
 

Industry 4.0 and the Industrial Internet of Things (IIoT)

 
 

Derek Lane, Wago

 
 

16:00

 
 

Close

 
 

 

 

 

Exhibition too ...

Supported by an exhibition with demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers, and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant.


Current exhibitors include:

Comments made on our previous seminars of this type:

“Very well presented and a lot of useful information” “Fantastic as always and very informative”

“Superb day for experience and information”

If you’d like to learn how to simplify your PROFIBUS, PROFINET or IO-Link application … don’t miss this one-day Seminar!

More information and Registration


 Back to list