Skip to main content
Training

PROFINET Commissioning and Maintenance

Admin,
  • 03.07.2019
  • 20.11.2019

The one-day PROFINET Commissioning & Maintenance (PNCM) course is designed for those who test, troubleshoot and maintain PROFINET installations and operation. The course builds on our many years’ experience gained through delivering the successful and hands-on PROFIBUS Commissioning and Maintenance course and guarantees high-quality training. It is not a PI certified course but is very important in understanding of PROFINET applications and engineering practice.

 

Attendance at the CPNI course is prerequisite.

Content:

Introduction

-          The ISO/OSI Model Basics, Device Physical Address and LLDP

Network Hardware and Topology Commissioning

-          Basic Hardware Configuration and GSDML File

Practical Session – Flashing and Testing Devices

Practical Session – Manual and Auto Device Replacement

Practical Session – Troubleshooting and System Debugging

PROFINET System Maintenance and Engineering Practice

Network and Device Details for Documentation


To Register - See bottom of page for Registration Form

This course is also available for delivery on-site for groups of 6 or more. Please contact Ann on +44 207 193 8018 to discuss arrangements.  


About PROFINET Training Courses at MMU PITC (from May 2019)

PROFINET is established and growing rapidly, particularly in the context of Industry 4.0 and now the process industries. It’s time to join the growing list of Certified PROFINET Installers and Engineers registered with PROFIBUS & PROFINET International! Our PROFINET training is structured to meet a variety of needs. Please see the diagram provided here. 

 

For electricians and installers, the one-day PI Certified PROFINET Installer course is essential and its qualification is part of the legal requirements in many PROFINET projects. The one-day PROFINET Commissioning & Maintenance (PNCM) course is not a PI certified course but very important in understanding of PROFINET applications and engineering practice. The course builds on our successful PROFIBUS Commissioning and Maintenance course and is an integral part of the Certified PROFINET Engineer course.

 

CPNI and PNCM can be booked separately. However, to attend PNCM, one has to complete CPNI. 

After the initial 2-day training, many will go on to complete their training to achieve the Certified PROFINET Engineer (CPNE) qualification. Note that CPNI and PNCM are an integral part of CPNE. 

Training Material & Equipment:

Students on the course work in pairs, each with a laptop PC running PROFINET. Each pair has a dedicated rack of PROFINET devices – see details below. Each person receives colour printed training notes and a workbook. 

Before attending the courses, students will receive a copy of the textbook, “PROFINET in Practice – Installation, Maintenance and System Engineering” for advanced preparation and revision. 

  • Siemens S7-300 PLC with integrated PROFINET IO Controller. Engineering Tools are SIMATIC Manager and Proneta.
  • IO-Devices are from a number of companies including Wago, Phoenix Contact and Siemens.
  • Switches are of Phoenix Contact and Siemens.
  • IO-Supervisor/Monitor is PROCENTEC Netilities.
  • Protocol Analyser is Wireshark.
  • Ethernet cable testers
  • Shield current testers
  • Shield impedance testers 

 

To Register - See bottom of page for Registration Form

This course is also available for delivery on-site for groups of 6 or more. Please contact Ann on +44 207 193 8018 to discuss arrangements.  


Files:
#DateFilenameTypeSize
28/07/2019Training_Courses_at_MMU-2019_order_form.docxdocx101 KB
 Back to list